Classes:

Novice Junior (13 and under)

All pocket bike chassis must be a manufacture production specification. Limited to a stock air cooled 40cc engine with a 3-port cylinder, single or dual reeds, and a 14mm single stage carburetor. The use of any production exhaust is allowed. Stock Blata 3.4 hp engines are allowed to use a stage 1 kit. No modifications to the frame, bodywork, engine, reed block, carburetor, exhaust, or wheels are allowed.

Novice Senior (14 and over)

All pocket bike chassis must be a manufacture production specification. Limited to a stock air cooled 40cc engine with a 3-port cylinder, single reed, and a 12mm single stage carburetor. No modifications to the frame, bodywork, engine, reed block, carburetor, exhaust, or wheels are allowed. All Cag pocket bikes must be a Blata replica with 6.5” wheels and made in China to be eligible. Stock Blata 2.5’s with a stock 3.4 hp engine are allowed in this class.

Junior 4.2 Production

All pocket bike chassis must be a manufacture production specification. Limited to a stock air cooled 40cc engine with a 3-port cylinder, single or dual reeds, and a 14mm single stage carburetor. All bikes must have installed a 14 mm exhaust restrictor plate checked out from NWMRL at registration and returned at the end of the race or practice day.  The use of any production exhaust is allowed. Stock Blata 3.4 hp engines do not have to use an exhaust restrictor and are allowed to use a stage 1 hop up kit. No modifications to the frame, bodywork, engine, reed block, carburetor, exhaust, or wheels are allowed. The top three finishers in this class will be required to check in with tech immediately upon exiting the race track in order to have their bike checked for the correct, unaltered exhaust restrictor.

Junior GP

All pocket bike chassis must be a manufacture production specification. Limited to a stock air cooled 40cc engine with a 3-port cylinder, single or dual reeds, and a 14mm single stage carburetor. The use of any production exhaust is allowed. No modifications to the frame, bodywork, engine, reed block, carburetor, exhaust, or wheels are allowed.

Senior Super Production

All pocket bike chassis must be a manufacture production specification. Engines are limited to a stock air or water cooled 40cc with 3-port cylinder, single or dual reeds, and a 14mm single stage carburetor. The use of any production exhaust is allowed. No modifications to the frame, bodywork, engine, reed block, carburetor, or exhaust are allowed.

Senior Open GP

All pocket bike chassis must be a manufacture production specification. pocket bike engines may be modified, but limited to 50cc for a two-stroke or 90cc for a four-stroke with a 21mm carburetor.

For a list of all possible classes, see the rules.  Other classes can be run if 3 riders pre-register to run in them but we cannot guarantee that classes will be added.  Novice classes are required for those who haven't been licensed through a pocket bike racing organization before, no matter what level of skill the rider believes that they possess.  The Novice classes will go through a class which will cover information necessary to keeping everyone safe.

MENU
Home
Location
Registration
Rules
Racers / Numbers
Class Structure
Fees
Calendar / Schedule
Results
Contact Us

Lap Times Available At:

Our track:

Message Boards

R-Tech 110 Octane Race Fuel, $45 for 5 gallons